TSUNE TK5C 160GL CNC - Automatic Circular Sawing Machine
with Auto-loader

Other Tsune Features
Material AISI 1015
160mm Dia x 50mm Length
Cut Time 33.3 seconds
Cycle Time 39.7 seconds
Blade Life estimated 2,500 pieces.

For some applications and work environments the new CNC version from Tsune can make life much easier and can eliminate costly operator errors.
The operator programs diameter, cut off length and a steel grade based on the AISI / SAE numbering system and if needed assigns a 8 digit alpha numeric job or part number. These jobs can be stored in memory and called up and only the parts counter needs to be set. Speed, feed and the sawhead position is calculated and optimised for short cycle times and optimum blade life.

Experts at Sawcraft are available to discuss with you and advise solutions to problems involving high production and high precision sawing. We are experienced in the application of the latest disposable narrow kerf carbide-tipped sawblades sawing technology.
View Video Demo -TSUNE TH5C - 160GL

Carbide Tipped Saw Blade / Fully Automatic Carbide Sawing Machine

Features

Today's cutting serivces require sawing equipment with the proper balance of high production, precision, simple operation, and reliability, while giving due consideration to environmental concerns.

The all new TK5C-72GL is a fully automatic carbide sawing machine that has been developed by combining Tsune's long experience with the latest in machine design technology.
The high production TK5C-72GL provides almost dry, close tolerance parts with CNC control of all cutting parameters, and a minimum of operator intervention.

Controls

Machine control and set up are achieved via user friendly color LCD touch panel together with conventional pushbuttons and switches.

Tsune's third generation CNC determines the ideal cutting feed, speed and recommends the correct saw tooth configuration for a wide variety of ferrous metals based on their shape, size and their AISI grade.
Additional parameters such as trim cut length, cut off length and the quantity of parts are programmable. In the event of a machine problem, the touch screen will display relevant diagnostic information.
Up to 50 sets of job data can be stored and instantly recalled.

The saw head is designed for heavy duty application with massive helical gears and precision saw spindle running in oil and supported by high precision bearings. cutting speeds are infinitely variable through an inverter drive. The saw feed mechanisim utilizes an AC Servo/ ball screw drive for rapid and precise movements, and incorporates a pair of precision heavy duty linear guides for long term cutting accuracy.

The mist lubricator applied a precise amount of vegetable based oil mist to the saw blade, leaving the cut parts virtually dry and resulting in a clean work environment.

Machine Construction

Auto Loader
The auto loader's simple and sturdy design permits set up changes to be made quickly and from only one convenient location.

Like the saw feed, the gripper type material feed employs a pair of linear bearings, and is powered by a servo motor and ball screw drive to ensure highspeed and accurate indexing. The floating mechanism prevents scuffing marks made by the vises during feeding.

Automatic Carbide Sawing Machine: High Production, Low Maintenance

Tsune Features

When sawing steel bar or tube in large volumes, the Tsune high production circular saw range will offer the most cost effective solution on most applications.

Depending on the material, the Tsune can produce a superior and in some cases machined type, surface finish.  This is achieved with the highly efficient and powerful vice clamps that produce burr free cuts and the 3 point blade guides that allow very tight tolerances to be achieved and often removes the need for secondary operations.

The Tsune machine design enables close tolerance sawing on
difficult to cut materials, at much faster production rates. 
The material is fed to the cutting head by a gripper fed vice to assist very close tolerances and rapid cycle times.

Cutting Capacity

Round Solid Bar 15-100mm
Square Solid Bar 15-75mm

Sawblade Dimensions

360 x 2.6 x 50 x 60/80/100/144 Teeth.
Sawblade RPM 12 -120

Tsune Standard Features

Lowest cost per cut, due to ultra-thin disposable tipped sawblades.  Unequalled sawblade-life up to 40,000 cuts per blade.

Material AISI 1015
60mm Dia x 50mm length
Cut Time 8.6 seconds
Cycle Time 12.2 seconds
Blade life estimated 16,000 pieces

Visit the 'TSUNE High Production' Website
View Video Demo -TSUNE TH5C - 102GL

TSUNE TK5C 160GL CNC - Automatic Circular Sawing Machine
with Auto-loader

Other Tsune Features
Material AISI 1015
160mm Dia x 50mm Length
Cut Time 33.3 seconds
Cycle Time 39.7 seconds
Blade Life estimated 2,500 pieces.

For some applications and work environments the new CNC version from Tsune can make life much easier and can eliminate costly operator errors.
The operator programs diameter, cut off length and a steel grade based on the AISI / SAE numbering system and if needed assigns a 8 digit alpha numeric job or part number. These jobs can be stored in memory and called up and only the parts counter needs to be set. Speed, feed and the sawhead position is calculated and optimised for short cycle times and optimum blade life.

Experts at Sawcraft are available to discuss with you and advise solutions to problems involving high production and high precision sawing. We are experienced in the application of the latest disposable narrow kerf carbide-tipped sawblades sawing technology.

Visit the 'TSUNE High Production' Website
View Video Demo -TSUNE TK5C 160GL CNC-