Automatic Carbide Sawing Machine: High Production, Low Maintenance

Tsune Features

When sawing steel bar or tube in large volumes, the Tsune high production circular saw range will offer the most cost effective solution on most applications.

Depending on the material, the Tsune can produce a superior and in some cases machined type, surface finish.  This is achieved with the highly efficient and powerful vice clamps that produce burr free cuts and the 3 point blade guides that allow very tight tolerances to be achieved and often removes the need for secondary operations.

The Tsune machine design enables close tolerance sawing on
difficult to cut materials, at much faster production rates. 
The material is fed to the cutting head by a gripper fed vice to assist very close tolerances and rapid cycle times.

Cutting Capacity

Round Solid Bar 15-100mm
Square Solid Bar 15-75mm

Sawblade Dimensions

360 x 2.6 x 50 x 60/80/100/144 Teeth.
Sawblade RPM 12 -120

Tsune Standard Features

Lowest cost per cut, due to ultra-thin disposable tipped sawblades.  Unequalled sawblade-life up to 40,000 cuts per blade.

Material AISI 1015
60mm Dia x 50mm length
Cut Time 7.1 seconds
Cycle Time 16.2 seconds
Blade life estimated 6,500 piece

Visit the 'TSUNE High Production' Website
View Video Demo -TSUNE TH5C - 102GL

FMB offer a wide range of manual bandsaw machines starting from under £400.

View 'FMB Bandsaws' Website

TSUNE TK5C 160GL CNC - Automatic Circular Sawing Machine
with Auto-loader

Other Tsune Features
Material AISI 1015
160mm Dia x 50mm Length
Cut Time 33.3 seconds
Cycle Time 39.7 seconds
Blade Life estimated 2,500 pieces.

For some applications and work environments the new CNC version from Tsune can make life much easier and can eliminate costly operator errors.
The operator programs diameter, cut off length and a steel grade based on the AISI / SAE numbering system and if needed assigns a 8 digit alpha numeric job or part number. These jobs can be stored in memory and called up and only the parts counter needs to be set. Speed, feed and the sawhead position is calculated and optimised for short cycle times and optimum blade life.

Experts at Sawcraft are available to discuss with you and advise solutions to problems involving high production and high precision sawing. We are experienced in the application of the latest disposable narrow kerf carbide-tipped sawblades sawing technology.

TSUNE TK5C 160GL CNC - Automatic Circular Sawing Machine
with Auto-loader

Other Tsune Features
Material AISI 1015
160mm Dia x 50mm Length
Cut Time 33.3 seconds
Cycle Time 39.7 seconds
Blade Life estimated 2,500 pieces.

For some applications and work environments the new CNC version from Tsune can make life much easier and can eliminate costly operator errors.
The operator programs diameter, cut off length and a steel grade based on the AISI / SAE numbering system and if needed assigns a 8 digit alpha numeric job or part number. These jobs can be stored in memory and called up and only the parts counter needs to be set. Speed, feed and the sawhead position is calculated and optimised for short cycle times and optimum blade life.

Experts at Sawcraft are available to discuss with you and advise solutions to problems involving high production and high precision sawing. We are experienced in the application of the latest disposable narrow kerf carbide-tipped sawblades sawing technology.

Visit the 'TSUNE High Production' Website
View Video Demo -TSUNE TK5C 160GL CNC-