Sawcraftuk - Machinery - Cosen, FMB and Tsune sawing machines, automatic bandsaws, grit edge bandsaws and other cutting machines.

FMB Minor

FMB Minor Features

Portable manual bandsaw machine to cut from 0° to 45° right. Model equipped with gravity feeding system and end cut micro to stop the blade. Head structure in aluminium casting. Clamping vice with fast approach to the material. Blade guide with side bearings. Chip pan on the basement. Millimetric reference length stop measuring system. Cutting length 0÷430 mm.

Line Voltage: 220V/50Hz/1Ph (110V/50Hz/1Ph-110V/60Hz/1Ph Available). Machine colours: yellow RAL 1018 and grey RAL 7037.

Technical Characteristics

mm	m/1'	HP	KW	HP	KW	HP	KW
1470x13x0,65	45	0,5	0,37	-	-	-	-



HP	KW	HP	KW	KG	axbxc m	mm	mm (hxb)
-	-	-	-	26	0,7x0,4x0,5	145	-

Cut Ability
0°

Ø mm		mm (axb)		mm (axb)		mm (axb)
100		100x100		100x150		-

<--45°				45°-->

Ø mm	mm (axb)	mm (axb)	mm (axb)	Ø mm	mm (axb)	mm (axb)	mm (axb)
-	-	-	-	60	60x60	60x100	-

<--60°				60°-->

Ø mm	mm (axb)	mm (axb)	mm (axb)	Ø mm	mm (axb)	mm (axb)	mm (axb)
-	-	-	-	-	-	-	-

FMB: Website

FMB Phoenix

Official FMB Website

FMB Phoenix Features

Small Machine Big Capacity
A Robust Cost Effective Machine
Cuts up to 220mm Round and 220 x 220 Box
Cuts from 0 degree's to 60 degree's Manual or Gravity Feed.
Compact design with built in flood coolant
Easy to operate and very reliable +1 meter infeed rollers

Manual band saw machine to cut from 0° to 60° right. (Manual/Gravitational for version +G). Head structure in special aluminium casting alloy. Dynamometric blade tensioning. Head handgrip with integrated cycle button. Blade guide with combined action of side bearings, carbide plates and top bearing. Direct drive: Reduction gear box with inclined grinded case hardened teeth lubricated with long lasting grease. (Mechanical variator 20÷100 m/min for version +V).
Material clamping vice with manual positioning and fast clamping system.
Ergonomic working table and control panel. Head rotation angle stop at 0° and 60°.Degrees measuring system, graduated scale and rugged in construction locking lever. 1 meter loading side roller table equipped with free rollers for material support. Millimetric reference length stop measuring system. Cutting length 0÷600 mm. Heavy duty basement with sheets metal construction in different thickness, chips holding sides. Hydraulic cooling pump in the back of the basement for feeding both blade guides. Electrical cabinet with 24VAC, main switch, safety unit and electric drives. Total protection against highest voltage and short circuit current. Protection level IP 55.
Line voltage: 400V/50Hz/3Ph standard (230V/50Hz/1Ph-230V/50Hz/3Ph-110V/60Hz/1Ph- 220V/60Hz/3Ph-440V/60Hz/3Ph-575V/60Hz/3Ph available). Machine colours: yellow RAL 1018 and grey RAL 7037.

Technical Characteristics

mm	m/1'	HP	KW	HP	KW	HP	KW
2450x27x0,9	35-70	1	0,74	0,08	0,06	-	-



HP	KW	HP	KW	KG	axbxcm	mm	mm (hxb)
-	-	-	-	268	0,8x1,4x1,6	985	-

Cut Ability
0°

Ø mm		mm (axb)		mm (axb)		mm (axb)
220		215x215		130x250		-

<--45°				45°-->

Ø mm	mm (axb)	mm (axb)	mm (axb)	Ø mm	mm (axb)	mm (axb)	mm (axb)
-	-	-	-	150	140x140	80x150

<--60°				60°-->

Ø mm	mm (axb)	mm (axb)	mm (axb)	Ø mm	mm (axb)	mm (axb)	mm (axb)
-	-	-	-	90	90x90	90x90	105x90

FMB Triton

Official FMB Website

FMB Triton Features

Manual band saw machine to cut from 0° to 60° right. (Manual/Gravitational for version +G). Head structure in special aluminium casting alloy. Dynamometric blade tensioning. Blade cleaning brush integrated in the head protection cover. Head handgrip with integrated cycle button. Blade guide with combined action of side bearings, carbide plates and top bearing. Direct drive: Reduction gear box with inclined grinded case hardened teeth lubricated with long lasting grease. (Mechanical variator 20÷100 m/min for version +V). Output shaft of the reduction gear box Ø 40 mm and motor wheel connection with a keyless shaft/hub connection.
Material clamping vice with manual positioning and fast clamping. Ergonomic working table and control panel. Head rotation angle stop at 0°,45° and 60°. Degrees measuring system, graduated scale and rugged in construction locking lever. Loading side: Rugged in construction support roller with double positioning. Millimetric reference length stop measuring system.

Cutting length 0÷600 mm. Heavy duty basement. Sheet metal construction in different thickness, chips holding sides. Front door with key locking. Hydraulic cooling pump with 20 l. capacity tank for feeding both blade guides. Electrical cabinet with 24VAC, main switch, safety unit and electric drives. Total protection against highest voltage and short circuit current. Protection level IP 55.
Line voltage: 400V/50Hz/3Ph standard (230V/50Hz/1Ph-230V/50Hz/3Ph-110V/60Hz/1Ph-220V/60Hz/3Ph-440V/60Hz/3Ph-575V/60Hz/3Ph available). Machine colours: yellow RAL 1018 and grey RAL 7037.

Technical Characteristics

mm	m/1'	HP	KW	HP	KW	HP	KW
2700x27x0,9	35-70	1,77	1,3	0,12	0,09	-	-



HP	KW	HP	KW	KG	axbxc m	mm	mm (hxb)
-	-	-	-	286	0,8x1,4x1,6	985	-

Cut Ability
0°

Ø mm		mm (axb)		mm (axb)		mm (axb)
240		240x240		210x280		240x260

<--45°				45°-->

Ø mm	mm (axb)	mm (axb)	mm (axb)	Ø mm	mm (axb)	mm (axb)	mm (axb)
-	-	-	-	185	175x175	140x180	220x165

<--60°				60°-->

Ø mm	mm (axb)	mm (axb)	mm (axb)	Ø mm	mm (axb)	mm (axb)	mm (axb)
-	-

FMB Antares

Official FMB Website

FMB Antares Features

Manual manual band saw machine to cut from 0° to 60° right and 45° left. (Manual/Gravitational for version +G). Head structure in special aluminium casting alloy. Dynamometric blade tensioning. Blade cleaning brush integrated in the head protection cover. Head handgrip with integrated cycle button. Blade guide with combined action of side bearings, carbide plates and top bearing.
Direct drive: Reduction gear box with inclined grinded case hardened teeth lubricated with long lasting grease. (Mechanical variator 20÷100 m/min for version +V). Output shaft of the reduction gear box Ø 40 mm and motor wheel connection with a keyless shaft/hub connection.
Material clamping vice inclined of 45° left, with manual positioning and fast clamping system. Ergonomic working table and control panel. Head rotation angle stop at 45° and 60°. Degrees measuring system, graduated scale and rugged in construction locking lever.
Loading side: Rugged in construction support roller and chutes. Millimetric reference length stop measuring system. Cutting length 0÷600 mm. Heavy duty basement. Sheet metal construction in different thickness, chips holding sides. Front door with key locking. Hydraulic cooling pump with 20 l capacity tank for feeding both blade guides. Electrical cabinet with 24VAC, main switch, safety unit and electric drives. Total protection against highest voltage and short circuit current. Protection level IP 55.
Line voltage: 400V/50Hz/3Ph standard (230V/50Hz/1Ph-230V/50Hz/3Ph-110V/60Hz/1Ph-220V/60Hz/3Ph-440V/60Hz/3Ph-575V/60Hz/3Ph available). Machine colours: yellow RAL 1018 and grey RAL 7037.

Technical Characteristics


mm	m/1'	HP	KW	HP	KW	HP	KW
2700x27x0,9	35-70	1,77	1,3	0,12	0,09	-	-



HP	KW	HP	KW	KG	axbxc m	mm	mm (hxb)
-	-	-	-	334	0,9X1,5X1,6	960	-

Cut Ability
0°

Ø mm		mm (axb)		mm (axb)		mm (axb)
200		200x200		-		240x200

<--45°				45°-->

Ø mm	mm (axb)	mm (axb)	mm (axb)	Ø mm	mm (axb)	mm (axb)	mm (axb)
140	135x135	125x145	170x105	180	175x175	135x180	200x140

<--60°				60°-->

FMB Orion

Official FMB Website

FMB Minor Features

Manual band saw machine to cut from 0° to 60° right and 45° left. (Manual/Gravitational for version +G).Head structure in special aluminium casting alloy. Dynamometric blade tensioning. Blade cleaning brush integrated in the head protection cover. Head handgrip with integrated cycle button. Blade guide with combined action of side bearings, carbide plates and top bearing.
Direct drive: Reduction gear box with inclined grinded case hardened teeth lubricated with long lasting grease. (Mechanical variator 20÷100 m/min for version +V). Output shaft of the reduction gear box Ø 40 mm and motor wheel connection with a keyless shaft/hub connection.
Wide table for material support, material clamping vice with manual positioning and fast clamping system. Ergonomic working table and control panel. Head rotation angle stop at 0°,45° and 60°. Degrees measuring system, graduated scale and rugged in construction locking lever. Millimetric reference length stop measuring system. Cutting length 0÷600 mm. Heavy duty basement.
Sheet metal construction in different thickness, chips holding sides. Front door with key locking. Hydraulic cooling pump with 20 l capacity tank for feeding both blade guides. Electrical cabinet with 24VAC, main switch, safety unit and electric drives. Total protection against highest voltage and short circuit current. Protection level IP 55.

Line voltage: 400V/50Hz/3Ph standard (230V/50Hz/1Ph-230V/50Hz/3Ph-110V/60Hz/1Ph- 220V/60Hz/3Ph-440V/60Hz/3Ph-575V/60Hz/3Ph available). Machine colours: yellow RAL 1018 and grey RAL 7037.


mm	m/1'	HP	KW	HP	KW	HP	KW
2700x27x0,9	35-70	1,77	1,3	0,12	0,09	-	-



HP	KW	HP	KW	KG	axbxc m	mm	mm (hxb)
-	-	-	-	424	0,9x1,5x1,6	990	-

Cut Ability
0°

Ø mm		mm (axb)		mm (axb)		mm (axb)
240		240x240		200x280		240x270

<--45°				45°-->

Ø mm	mm (axb)	mm (axb)	mm (axb)	Ø mm	mm (axb)	mm (axb)	mm (axb)
150	135x135	125x145	240x65	175	170x170	170x170	240x155

<--60°				60°-->

FMB Titan +G

Official FMB Website

FMB Titan Features

Powerful and Robust Machine
Cuts up to 240 x 240mm Box
Cuts from 0 degree's to 60 degree's.
Popular all purpose machine
Easy to operate and very reliable.

Manual / Gravitational band saw machine to cut from 0° to 60° right. Head structure in 3 parts: special aluminium alloy, steel and cast iron. Dynamometric blade tensioning. Blade broken micro. Blade cleaning brush integrated in the head protection cover. Head handgrip with integrated cycle button.

Head gravity feeding system, hydraulic cylinder and front valve for feeding regulation. Blade guide with combined action of side bearings, carbide plates and top bearing.

Direct drive: Reduction gear box with inclined grinded case hardened teeth lubricated with long lasting grease. (Mechanical variator 20÷100 m/min for version +V). Connection of the motor wheel to a flange with two conical bearings. Material clamping vice with manual positioning and fast clamping system. Ergonomic working table and control panel. Head rotation angle stop at 0°,45° and 60°. Degrees measuring system, graduated scale and rugged in construction locking lever.
Loading side: Rugged in construction support roller with double positioning. Millimetric reference length stop measuring system, cutting length 0÷600 mm.
Heavy duty basement. Sheet metal construction in different thickness, chips holding sides. Front door with key locking. Hydraulic cooling pump with 20 l. capacity tank for feeding both blade guides. Electrical cabinet with 24VAC, main switch, safety unit, electric drives and manual/gravitational selection. Total protection against highest voltage and short circuit current. Protection level IP 55.

Line voltage: 400V/50Hz/3Ph standard (230V/50Hz/1Ph-230V/50Hz/3Ph-110V/60Hz/1Ph-220V/60Hz/3Ph-440V/60Hz/3Ph-575V/60Hz/3Ph available). Machine colours: yellow RAL 1018 and grey RAL 7037.

Technical Characteristics

mm	m/1'	HP	KW	HP	KW	HP	KW
3300x27x0,9	35-70	1,77	1,3	0,12	0,09	-	-



HP	KW	HP	KW	KG	axbxc m	mm	mm (hxb)
-	-	-	-	456	0,9x1,8x1,6	960	-

Cut Ability
0°

Ø mm		mm (axb)		mm (axb)		mm (axb)
260		260x260		260x370		-

<--45°				45°-->

Ø mm	mm (axb)	mm (axb)	mm (axb)	Ø mm	mm (axb)	mm (axb)	mm (axb)
-	-	-	-	260	260x260	120x290	-

<--60°				60°-->

Ø mm	mm (axb)	mm (axb)	mm (axb)	Ø mm	mm (axb)	mm (axb)	mm (axb)
-	-	-	-	180	180x180	90x190

FMB Pegasus +G +VHZ

Official FMB Website

FMB Pegasus Features

Big Capacity Heavy Robust Machine
Cuts up to 320mm Round 320x320mm Box
Comes with Head Gravity Feeding System
Hydraulic Cylinder and Front Valve for Feeding Regulation
VHZ Electronical Blade Speed Regulation
Cuts from 0 degrees to 60 degrees.

Semiautomatic band saw machine to cut from 0° to 60° right, from 0° to 45° left and up to 60° for trim cut. Head structure in 3 parts: special aluminium alloy, steel and cast iron. Head feeding system with hydraulic cylinder and front balanced valve for feeding regulation and cutting optimizing. Dynamometric blade tensioning. Broken blade micro.

Direct drive: Reduction gear box with inclined grinded case hardened teeth lubricated with long lasting grease. VHZ electronical blade speed regulation for a wide range of blade speed selection. Connection of the motor wheel to a flange with two conical bearings. Blade cleaning brush driven by motor gearbox. Blade guide with combined action of side bearings, carbide plates and top bearing. Material clamping vice with rack system, manual positioning and hydraulic stop cylinder. Manual vice translation, right-left, on linear guides with mechanical stops and locking system. Ergonomic working table and control panel.

Head rotation angle stop at 0°, 45° and 60° and digital display for the visualization of the cutting angle and rugged in construction locking lever. Two-rolled roller table for material supporting in loading side placed on the basement. The roller table as the possibility to slide back so to guaranty material support also during mitre cuts. Heavy duty basement. Sheet metal construction in different thickness, chips holding sides.

Hydraulic cooling pump with 30 l capacity located in the back of the basement for feeding both blade guides. Hydraulic unit for head cylinder movement, vice cylinder. Electrical cabinet with 24VAC, main switch, safety unit. Total protection against highest voltage and short circuit current. Protection level IP 55. Electronic control panel: blade speed selection, coolant selection, piece counter, cutting angle display and cutting height memorizing. Alarm messages display and auto checking at start up.

Line voltage: 400V/50Hz/3Ph standard (230V/50Hz/1Ph-230V/50Hz/3Ph-220V/60Hz/1Ph-220V/60Hz/3Ph-440V/60Hz/3Ph-575V/60Hz/3Ph available). Machine colours: yellow RAL 1018 and grey RAL 7037.

Technical Characteristics

mm	m/1'	HP	KW	HP	KW	HP	KW
4120x34x1,1	16÷120	2,9	2,2	0,12	0,09	-	-



HP	KW	HP	KW	KG	axbxc m	mm	mm (hxb)
-	-	0,08	0,06	850	1,4x2,1x1,6	760	-

Cut Ability
0°

Ø mm		mm (axb)		mm (axb)		mm (axb)
320		320x320		230x500		400x320

<--45°				45°-->

Ø mm	mm (axb)	mm (axb)	mm (axb)	Ø mm	mm (axb)	mm (axb)	mm (axb)
-	-	-	-	320	240x240	240x340	-

<--60°				60°-->

Ø mm	mm (axb)	mm (axb)	mm (axb)	Ø mm	mm (axb)	mm (axb)	mm (axb)
-	-	-	-	200	110x110	110x230	180x130

FMB: Website