SH10810F Features

Structure:

• Cosen employs a rigid, oversized round column design, which keeps
  the same penetrating angle to the material from top to bottom of cut,
  to enable smooth and consistent feed rate throughout
  the entire cutting cycle.

• The oversized round columns provide continuous surface contact with
  the sawhead throughout the entire cutting process.
  Blade Drive & Lubrication System:

• Heavy Duty Inverter blade drive system provides infinitely variable
  blade speed control from the operator’s control station.
  
• LED speed indicator is conveniently located on the control panel.

• Powered Chip Brush is driven by a separate motor in sync with
  blade motor for optimum blade cleaning prolonging blade life &
  blade guides.

• Complete coolant system with integral recovery system.

• Automatic hydraulic blade tension device insures proper tension
  to blade when machine is turned on and will relax blade tension
  slightly when turned off, extending blade life.

• Hydraulically powered guide arm is activated from the operator's
  counsel & permits more efficient cutting by being able to
  be moved close to the material, regardless of size.

• Hydraulically operated carbide blade guides are relieved
  to provide unsurpassed lubricating and cooling of the blade
  and blade guides.

• Additional blade guiding bearings contacting the back of the
  blade provides extra support for added penetrating force
  for faster cuts.

• Vibration damper can effectively reduce blade vibration produced
  under high-speed cutting.

• Independent Control Station is located ergonomically at waist height
  featuring convenient accessing and ease of operation.

• "Last Cut" or "Keep On" selector enables you to choose either to turn the machine off or return the saw head to the pre-selected cut height ready for the next cut.

• Hydraulically lifting take-in roller is actuated in hydraulic force to lift up the stock for easy adjustment of the stock position.

• Heavy duty machine vise provide ample hydraulic pressure onto the material

• Shadow Light projects the blade line onto the work piece for convenient length measurements.

• One full stroke split vise securely hold the material during the cutting process
  
  

  Max. Capacity Round 800 mm (31.5") Square 800 mm (31.5") Rectangular(H x W) 800 x 1000 mm (31.5" x 39.4") Blade Capacity 8850L x 54W x 1.6Tmm (348.4" x 2.1" x 0.063") Speed 20-100 m/min. (66-328 fpm) Tension Hydraulic (with blade breakage detector) Motor Blade 7.3 kW (10 HP) Hydraulic 2.19 kW (3 HP) Coolant 0.365 kW (1/2 HP) Tank Hydraulic 75L (18.75 gal.) Coolant 120L (30 gal.) Work Bed Height 650 mm (25.6") Net Weight 5800 kgs (12760 lbs) Gross Weight 6200 kgs (13640 lbs) Floor Space(LxWxH) 2900 x 4400 x 2750 mm (114" x 173" x 108.3") Shipping Space(LxWxH) 20' open top container

SH1080D Features

Machine Features
Twin Columns design
Rigid design includes the main and the sub columns.? The cutting force distributes from top to bottom of the machine frame during the cutting period.

Double Cylinders Hydraulic Circuit Design
Use double cylinders to smoothly rise up and lower down the sawhead, meanwhile, the vibration during cutting procedure will be eliminated because of the strong support.

Cast Iron Bandwheels Made by a high-class cast iron with the huge diameter to drive the saw blade.

Inverter-Controlled Blade Speed Use the precise inverter (Telemecanique brand) to cooperate with 15HP blade motor, the blade speed can be adjusted from 15m/min to 80m/min stepless in accordance with the different cutting speeds requirement for various material characteristics.

Hydraulic Tungsten Carbide Blade Guide
Hydraulic controlled tungsten carbide blade guide clamp the blade securely. Convenient to control the motion on the control panel. The groove shaped design ensures the cutting fluid to pass through the blade guide and the blade, then gets into the cutting area of the material, thus the full cooling condition can be achieved and it extends the saw blade life.

Hydraulic-Controlled Blade Tension Device
The blade tension is hydraulic controlled. In addition, when the machine is not in use, the tension can be released to a slacken condition to avoid elastic fatigue.

Hydraulic Driven Guide Arm
The hydraulic driven guide arm allows the user to position the guide arm on the control panel
without manual adjustment.

Safety Consideration of the Wiring and Pipes
The conduits protect the electric wiring and the hydraulic circuit pipes.

Safety Protection Design of the Saw Blade
The auto motion detectors are interlocked with the control system so that any abnormal conditions such as the blade slippage or breakage can be detected quickly and then the machine stops immediately.

Planetary Gear Reducer (OPTIONAL)
The planetary gear reducer ensures high transmission efficiency.

Independent Wire Brush Driving System
The independent wire brush driving system rotates at the same speed with the blade to obtain the best chip-wiping condition.

Last Cut Function
Automatically stops the machine and shuts down the hydraulic system at the end of the last cut.

Robust Machine Structure
Compared with other brands, the machine structure of SH-1080D is designed under the rugged consideration and allows doing the heavy cutting job.

Precise Flow Control Valve
Use the precise flow control valve to finely adjust the cutting speed and achieve the perfect cutting condition. All designs & specification are subject to change without notice or obligation.

SH1010W Features

Machine Structure

• Dual Column design with oversized, precision ground columns ensures smooth saw frame movement and the consistently stable cutting force throughout the cutting cycle.? Added Cross Link on top of structure ties in both columns to complete a rugged gantry type design to offer unsurpassed rigidity.

• The heavy-duty Saw Frame is supported by dual columns and has a rugged cross-link design, which provides the best rigidity and the smoothest cutting conditions.

• The oversized round columns provide over 450 square inches of continuous surface contact with the sawhead throughout the entire cutting process.? Both columns are precision ground for smooth and consistent feed pressure & feed rates.

• Inverter Blade Speed Control is used for higher efficiency and accurate variable blade speed with easy to read LED blade speed indicator.

• Powered wire chip brush operates with a separate drive motor to provide independent optimum cleaning chip removal.

• Complete coolant system and cleaning gun

• Hydraulic Blade Tension insures consistently accurate recommended blade tension for straight cuts and increased blade life.? The blade tension is slightly released when the machine is idling, resulting in longer blade life.

• Hydraulic Blade Tension System, with large easy to read pressure gauge, makes changing saw blade easy and convenient.

• The Carbide Blade Guides are relieved to allow coolant to flow thru the guides to provide unsurpassed lubrication and cooling for the guides and the blade.

• Hydraulically powered blade guides insure proper blade guide clearance, and are operated from the operator’s counsel.

• Additional blade guiding bearings contacting the back of the blade provides extra support for added penetrating force for faster cuts.

• Heavy cast iron moveable Guide Arm is hydraulically powered from the operator’s control counsel for easy operation, and efficient cutting.

• "Last Cut" or "Keep On" selector enables you to choose either to shut off the machine at the end  of cut or return the saw head to the pre-selected cut height ready for the next cut.
  

• Ergonomically designed, user-friendly control panel.
  

• Precise Feed Rate Control Valve has 60 digit increments for finite feed rate control.
  

• Sawhead Work Height Selector aids the operator to quickly to adjust any designated saw frame height and cutting depth.

• Two feeding vises are respectively located on the front and rear side of the blade, each driven by a full stroke hydraulic cylinder.? When cutting is finished, even a thin workpiece will not fall because front and rear vises clamp simultaneously.? The feed length per stroke is 17.7??(450 mm) for the rear vise and 13.7??(350 mm) for the front vise.
  

• Roller work-bed provides a convenient way to load, position, and unload the material regardless of which side from which it’s fed.
  

• The Shadow Light projects the cut line on the material to make the measuring of cut lengths accurate.
  
  

  Max. Capacity Round 800 mm (31.5") Square 800 mm (31.5") Rectangular(H x W) 800 x 1000 mm (31.5" x 39.4") Blade Capacity 8850L x 54W x 1.6Tmm (348.4" x 2.1" x 0.063") Speed 20-100 m/min. (66-328 fpm) Tension Hydraulic (with blade breakage detector) Motor Blade 7.3 kW (10 HP) Hydraulic 2.19 kW (3 HP) Coolant 0.365 kW (1/2 HP) Tank Hydraulic 75L (18.75 gal.) Coolant 120L (30 gal.) Work Bed Height 650 mm (25.6") Net Weight 5800 kgs (12760 lbs) Gross Weight 6200 kgs (13640 lbs) Floor Space(LxWxH) 2900 x 4400 x 2750 mm (114" x 173" x 108.3") Shipping Space(LxWxH) 20' open top container

SH2020D Features

• Oversized precision ground, large dual columns

• Cross link connecting two columns for enhanced structural strength

• Four band wheel design

• Double cylinder hydraulic circuit design

• Planetary gearbox provides higher efficiency than traditional worm gear reducer

• Inverter controlled infinitely variable blade speed

• Hydraulic controlled carbide blade guides with bearing guides

• Two additional guides to support the blade from the top

• Automatic hydraulic blade tensioning device

• Hydraulically driven guide arm

• Integral coolant system

• Independent wire brush system

• Last cut function

• LED digital blade speed monitor

• Automatic shutoff sensor for out of stock

• Precision feed pressure control valve

• Saw blade height selector

• 3 sets of full stroke hydraulic cylinder vises located on both sides of the blade

• Stock position cylinder for easier handling and lifting

• Hydraulic driven work bed for safe and convenient material loading and unloading
  
  

  Max. Capacity	Round	2000 mm (78.7")
  	Square	2000 mm (78.7")
  	Rectangular(H x W)	2000 x 2000 mm (78.7" x 78.7")
  Saw Blade	Size(LxWxT)	15920L x 80W x 1.6Tmm (option:100 mm Width) (626.7" x 3.1" x 0.06")
  	Speed	15-80 m/min. (49-264 fpm)
  	Tension	Hydraulic Controlled
  	Guide	Tungsten Carbide Blade Guide (Hydraulic Clamping Force)
  	Cleaning	Electric Power Driven Wire Brush
  Motor Output	Blade	25HP (18.75 KW)
  	Hydraulic	5 HP (3.75 KW)
  	Coolant	0.5 HP (0.37 KW)
  Tank Capacity	Hydraulic Oil	160 Liter
  	Coolant	200 Liter
  Vise Control Method		Hydraulic
  Split Vise		Yes
  Double Sides Material Feeding		No
  Weight		30000 Kgs (66000 lbs)
  A (Bed Height)		830 mm (32.6")
  B (Length)		6600 mm (260")
  C (Width)		6340 mm (250")
  D (Height)		5800 mm (228")